
less glare. Same solid performance.
Anti-glare solar modules
Discover SoliTek anti-glare solar modules, featuring specialized satin glass designed to minimize reflections without compromising durability.
Special satin-texture glass surface
2,5 times lower reflection rate
Ideal for glare-sensitive areas
Only 2% less power
tested and verified by European laboratories
As low-glare as a matte wall
SoliTek Satin modules have undergone independent optical testing at MA39, the City of Vienna’s testing laboratory. The results provide reliable, measured data to support the planning of solar installations where glare and unwanted reflections are a concern.
Optical testing in Vienna

<59°
At angles below 59°, the tested module is comparable to a matte-painted wall.*
*Based on measured luminance coefficient characteristics compared with a conventional white-painted surface.
Additional testing in switzerland
This represents approximately 2.8 times lower measured luminance.
Independent testing by the SPF Institute for Solar Technology in Switzerland (2025), under simulated bright-sunlight conditions (100,000 lux). The measurement was performed on a PV sample incorporating the satin glass used in SoliTek’s Satin module range.

Long-lasting anti-glare design
Glare control built into the glass
A satin-textured front glass diffuses reflected sunlight, so the module surface appears calm and matte from most viewing angles.
Satin-textured glass, not a coating
Unlike solutions that rely on an additional anti-glare coating, SoliTek modules use satin-textured glass, with reflection-reducing properties built into the glass surface itself.
Nothing to peel off or wear away
While applied coatings may degrade over time, there is no separate anti-glare coating to peel off or wear away. This makes the satin glass structure a durable approach to reflection control.
Built for demanding conditions
- Extreme hail resistance: HW3–HW5, depending on the module type.
- High mechanical load resistance: 8.1–10 kPa pressure loads on selected variants.
- Versatile applications: From residential and commercial rooftops to BIPV projects.
These features are particularly relevant in Austria, where snow loads, hail exposure, and alpine conditions can significantly influence module selection.
Satin module range
Anti-glare modules for every project
Every module in the range uses the same satin-textured glass. Choose the format that suits your roof, facade or structure.
Sleek frameless glass-glass modules deliver superior aesthetics and high resistance to environmental factors. Ideal for modern architectural integration and self-cleaning performance.
Anti-Glare
SOLID Satin Frameless 445 W
- Efficiency22.07%
- Hail resistanceHW4
- Wind / Snow load, kPa5.4/10.5
implemented project References
Anti-glare projects with Satin modules




Planning a glare-sensitive project?
Project-specific glare assessments may still be required depending on installation conditions and local requirements.